5 Steps How to Remove Tree Stumps with a Chainsaw

Removing tree stumps with a chainsaw can seem like a daunting task if you’ve never done it before. But, fortunately, you can use this guide on 5 step how to remove tree stumps with a chainsaw to get the job done quickly and easily, whether it’s your first or your 10th time doing so. Read on below to see how to safely cut the tree down and remove its stump with one of these great options for removing tree stumps with a chainsaw.

No products found.

Research the Right Chainsaw for the Job

Research the Right Chainsaw for the Job

There are many chainsaws on the market and it can be difficult to know which one is right for the job. To avoid buying the wrong chainsaw, there are a few factors that you should consider before making your purchase: what type of cutting you will be doing, how powerful do you need your saw to be, how much control do you need over the saw, and price. All of these factors come into play when deciding which chainsaw will work best for you. It is important to research the different types of saws before purchasing so that you don’t end up with a tool that doesn’t suit your needs.

After deciding what type of saw you need, it is important to find one that will suit your needs and budget. There are many tools available that can help you find exactly what you need, from websites that compare chainsaws based on their features and prices to customer reviews on different models. It is important to consider all of these factors before making your purchase so that you know you have found something that suits both your needs and budget. Remember, safety first!

Methods To Remove Tree Stumps with a Chainsaw:

  • Clear the area around the stump of any obstructions such as rocks, roots or other stumps, if necessary.
  • Clear out any grass and weeds growing up around the tree stump that may be in the way of your chainsaw blade when you cut it off at ground level
  • For safety purposes, make sure all branches on either side of where you will cut are cut off before you begin cutting into your tree stump
  • Cut down into the ground using your chainsaw, moving it in a circular motion so that you cut all around the stump
  • If you have an extension cord available and can get it plugged in without interfering with your work (and if there is enough room for both), use it to power your saw
  • It’s important not to rush this step- take your time, go slow and be careful not to cut yourself. The last thing you want is to injure yourself while trying to remove tree stumps!
  • Once the top portion has been removed from the stump, place a sturdy piece of wood over it like a plank or large branch
  • Cut off each plank evenly until they’re flush with one another
  • Repeat this process on any surrounding smaller trees
  • Wear protective gear while removing tree stumps: heavy duty gloves and eye protection
  • Make sure the wood chips created by this process do not escape and fly back at you
  • Pour water onto the stump after removing it; this will help speed up decomposition

Tips for Safely Removing Tree Stumps:

  • Make sure the chainsaw is in good condition before using it and has plenty of oil on it. Check the chain for damage as well and tighten any loose bolts before using it.
  • Put your safety gear on including gloves, goggles, ear plugs, and closed-toe shoes.
  • Start the chainsaw up and make sure you’re close enough to cut through the entire stump without stopping or slowing down while cutting through it.
  • Cut off a branch and place it over the top of the tree trunk to use as a marker when you start sawing at the tree stump so that you know where to stop.
  • Saw straight into the middle of the tree trunk then turn away from it so that it falls away from where you are standing when sawing so that no one gets hit by flying debris.
  • After removing all branches but the trunk, try pushing against one side of the tree until some pressure is relieved from inside which will cause some cracks to form; repeat this process on both sides until finally there’s an audible cracking sound which means that pressure has been relieved inside making removal much easier.
  • If possible, bring someone else with you who can help hold the chainsaw or apply more weight to the end of the tree trunk if needed.

Tools Needed To Remove Tree Stumps

Tools Needed To Remove Tree Stumps:

To remove tree stumps, you will need: a chainsaw, safety goggles, hearing protection, ear plugs, heavy duty gloves, and jeans or heavy-duty pants. You may also need an axe for chopping up the stump after you have removed it from the ground. Some people choose to cut off the roots of the stump before removing it from the ground because they are more difficult to cut when they are still in the ground. If you do this, make sure that the area is clear so that no one can accidentally step on them.

Steps To Remove Stumps with a Chainsaw 

1) Put On Your Personal Protective Equipment

Put On Your Personal Protective Equipment

There is a multitude of ways to clear those stumps:
Put on your safety equipment, including safety goggles, hearing protection, and gloves.
Make sure your chainsaw is in good working order and that the chain is sharp enough for the job.
Cut the tree stump as high up as possible without cutting into any nearby roots or underground pipes; this will ensure that it’s easier to get out of the ground without further damaging those things.

Use a shovel to cut away at the soil around the base of the stump.
Once you’ve removed all the dirt from around the base of the stump, use your hands and knees to break up any remaining chunks so they are smaller before digging them away with your shovel.
Continue digging around until you can see where you want to start sawing through it (keep an eye out for underground water lines).

Saw slowly down through the center of the top part of tree stump until you reach below soil level where there is more resistance from still-living root systems (cutting just under surface).

2) Cut Tree Stump as Low to the ground

Cut Tree Stump as Low to the ground

The best way to remove tree stumps is by cutting it as low as possible, this will make the stump easier for you to get off and break up. Make sure that you are wearing long sleeves and pants so that you don’t get scratched or cut from the saw or chainsaw. Take your chainsaw or saw and put it against the tree stump and start cutting from one side of the tree stump towards the other. You will want to make sure that you are cutting on an angle so that when you are done, all of your cuts will meet at the top of the tree stump where you started.

When you have finished cutting your way around the stumps, stand up straight and pull out on one side of each cut while pushing in on the other side. Remember, if there is not enough space to be able to do this, then you might need another person’s help.

If there isn’t any damage on the other parts of the tree stump after removing them with the chain saw or handsaw, then those pieces can be left outside for later use. There could be some spots on the ground where it would be difficult for someone else to push in because they were too close together and once removed; they couldn’t go back together again. On occasion, instead of pulling down like you would normally do when removing a tree stump; you may need to push up instead.

3) Cut The Roots

Cut The Roots

To start, you should cut the tree stump at least six inches below ground level. This will help ensure that the stump does not grow back. Next, use the chainsaw to remove all of the roots from around and under the stump. If there are too many roots for your chainsaw, use an axe or shovel instead. Finally, pour boiling water over all of the roots until they turn black and die.

Allow everything to cool before applying any more steps. Cover The Roots: You should cover the roots with dirt or mulch in order to hide them and make them hard for new weeds to grow. Sometimes it is necessary to do this multiple times per year in order to keep any weeds away.

4) Pull The Stump Loose

Pull The Stump Loose

To remove tree stumps, first you need to pull the stump loose. To do this, take a chainsaw and cut the roots around the base of the tree. Then loosen the soil from around the roots of the tree. Next, put your foot on one side of the root ball and push outwards. With enough leverage, you should be able to lift it up for removal. If not, try loosening the dirt more or using a lever to help you.

Once the tree is pulled free from its place in the ground, use a shovel to dig away at it until all of the roots are gone. Then, break up the stump by cutting through any large pieces that may have been left behind. Finally, rake away any excess debris and finally dispose of the woody remains as per local regulations.

5) Disposing Of The Stump

Disposing Of The Stump

The first step is to dig out the stump as deep as possible. For stumps that are less than 6 inches in diameter, you can use an auger. The auger will bore into the ground and break up the roots so they can be dug out. This step is especially important for thin stumps because they are more difficult to remove without breaking them up first.

The next step is to cut off as much of the trunk that is still attached to the ground. You may want to consider using a chainsaw or hand saw for this part depending on how large your tree was and what tools you have available. Once you’ve reached the bottom of the trunk, it’s time to start digging out any remaining roots. A backhoe works well for larger stumps; however, if one isn’t available, use a shovel and axe (or any other tool) to break up roots and loosen dirt around the base of the stump. Then, simply fill in the hole and plant grass or flowers over it.


Conclusion

With the right tools and a few steps, removing tree stumps can be easy. The most important thing is to always use caution and make sure you are wearing protective gear like gloves and goggles. Use these steps to get started:

Position the chainsaw so that the teeth are facing away from you. Cut straight down at an angle, making sure not to saw back and forth or kick out sideways, which can cause kickback. Use your foot to push the saw down while cutting as this will help control how much pressure is applied on the chainsaw’s teeth.

When using this technique keep your blade at least 3/4 of an inch above the ground because it can cause additional resistance if too close. Stop periodically to oil the chainsaw, but don’t over-oil because it can cause problems. After every 5 minutes of operation, stop for 1 minute and then resume.

If you’re unsure about where to cut, put a string between two stakes before removing the stump so that there is a line for when you need to cut again. Make sure there is no dirt on the roots before starting to cut them off because this could affect your depth.

FAQS

How long does it take?

It depends on the size of the tree stump. Typically, it can take anywhere from 2-6 hours per stump.

How much does it cost?

It really depends on the size of the job and how many stumps need to be removed. The typical price ranges between $450-$800 for one or two stumps, and up to $1,500 for ten stumps or more. In order to get an estimate, please contact us by phone or email. What if there is something under the stump I want removed?

If there are roots that you don’t want dug up or something else under the stump that you want left alone, we recommend hiring someone who has proper equipment and know how in order not to damage your lawn further by digging around blindly trying to remove a root or whatever else may be buried under your tree’s stump!

What kind of tree do you typically work with?

We specialize in removing larger stumps. Our company also specializes in removing damaged trees and trees that have fallen into houses or property lines. We cannot help you dig out any tree roots near sidewalks, streets, driveways, homes etc. You would need to hire a professional for those jobs.

References & Additional Resources

Last Updated on December 24, 2022

Related articles

The Buyer’s Guide to the Best Drill Presses

Drill presses offer considerable accuracy and power for drilling...

Sanders for Car Paint: A Comprehensive Buyers Guide

What are the different types of sanders...

The Best Nonstick Pans: A Comprehensive Buyers Guide

What are the most common types of coatings...

The Best Streaming Devices: A Comprehensive Buyer’s Guide

Streaming devices have become an essential part of our...
spot_imgspot_img
Mark Wright
Mark Wrighthttps://printerchief.com
Mark Wright is the author and editor for Printerchief, where he brings his expertise in research and the English language to life in the world of technology journalism. When he's not immersed in the world of print, he loves exploring the outdoors in Michigan and Arizona - taking long hikes, fishing and cycling along the way. Andrew is a big reader and likes to take on DIY projects around the home and garden. With a love for the great outdoors and a sharp eye for detail, Andrew has managed to bring both a sense of adventure and enthusiasm to all his work.

LEAVE A REPLY

Please enter your comment!
Please enter your name here